COMMUNICATIONS. "The Insolence of Office."

Philadelphia, Nov. 20.

Editor Horseless Age:

In the test of the regulation of the Fairmount Park Commission

much more is involved than the mere question of

whether or not the park or certain roads of the park shall be

closed to automobiles. The case before us is not one created

intentionally. It was quite accidental and the result of

inadvertence and insufficient knowledge of a rather vague regulation

on one part and on the other part undue, heedless,

indiscreet severity.

The real issue is to restrain the "insolence of office."

Our guards are vested with power necessarily, and by reason

of the very rare appeal from their actions, little by little

they lose the sense of fitness in the enforcement of rules.

More than this, there is involved a resistance to high-handed,

unauthorized, unlawful police violence against the public.

And still deeper there is a laying bare of the ill-considered,

crude legislation from which we suffer so much. The laws

drafted ordinarily, when thev are under fire, are shown up to be

vague, ambiguous and really unenforceable.

Respectfullv yours.

JULES JUNKER.

Vanerbilt Race Ban

Auto Club Announces Disqualification of All Who Take Part.

The Automobile Club of America, through its contest committee, officially placed the ban of
the automobile clubs of Europe upon the Vanderbilt cup race, to be held by the American
Automobile Association in Long Island on October 24. last night. A resolution was adopted
declaring; that any manufacturer, owner, driver, mechanician or agent taking part in
Una or any other American international race not sanctioned by the club would be debarred
from all races to be held in the future, here or abroad under the sanction of any member of
the International Association of Recognized Automobile Clubs, of which the Automobile Club
of America Is the only American member. The action marks the final break between the
two great automobile bodies, and war to the knife will follow.

Among those present at the committee's meeting last night was H. C. Pierson, of the
Massachusetts Automobile Club. which was taken to indicate a coming breach
between that body and the American Automobile Association.

Have You a Spider On Your Car?

This wonderful little device will actually save from 20 per cent, to 50 per cent, of your gasoline expense. It
costs only $6.00 and is sold under an absolute guarantee to do what is claimed for it—your money back otherwise.

The Spider is easily inserted in any machine at your garage or just as readily with your own hands. It
mixes the air and gas thoroughly, as no carburetor does, yielding the minimum of resistance with the maximum of cutting power.

Twice as much Mileage out of a Gallon

That's one man's experience with The Spider. It not only saves gas—it prevents choking, eliminates friction,
increases power and adds immeasurably to the comfort of motoring. It pays for itself over and over again.

Ask the nearest dealer in auto supplies to show you The Spider. If he hasn't it, send direct to us.

Let us mail you the story of "One Man Who Cut His Gas Bills in Half."

RAIMES & CO., Distributors of Globe Metal Polish and Other Auto Supplies

52 Ferry Street, New York, N. Y.

They Couldn't Stop

Almost daily the papers in some part of the country contain accounts of serious automobile collisions or other accidents, which are due to brakes slipping on account of inefficient or defective brake linings.

Suppose your brake linings are made of such material that you can't stop your car in a shorter distance than 25 feet—and you've got to stop short. Then what?

Equip your brakes with J-M Non-Burn Brake Lining and they will obey your slightest pressure. With J-M Non-Burn lined brakes you can stop your car almost instantly if necessary, yet less pressure on the brakes will stop it as slowly and gently as you desire.

J-M Non-Burn Lining is made from the long, tough fibres of the well-known Asbestos Rock, interwoven with fine brass wires.

Being made from non-organic material it cannot be affected at all by the disintegrating action of gasoline, kerosene, lubricating oils or water. And asbestos being fireproof, Non-Burn will never char or burn when subjected to the most intense frictional heat.

Equip your brakes with J-M Non-Burn and be safe.

Write nearest branch today for a free copy of the new book, "Practical Pointers on the Care of Automobile Brakes," and a sample of J-M Non-Burn Lining.

H. W. JOHNS-MANVILLE CO.

Manufacturers of Asbestos
and Magnesia Products.


Asbestos Roofings. Packings.
Electrical Supplies, Etc.


Baltimore 
Cleveland
Boston 
Buffalo 
Chicago 
Cleveland
Dallas
Detroit
Kansas City
London
Los Angeles
Milwaukee
Minneapolis
New Orleans 
New York 
Philadelphia
Pittsburg
San Francisco
Seattle
St. Louis

COMMUNICATIONS. "How Many Wheels?"

Albany, N. Y., Oct. 25.

Editor Horseless Age:

I have read with interest the several articles published in

your valuable journal in regard to three-wheeled vehicles. In

last week's issue I noted the comments of Messrs. Duryea and

Bramwell. The only advantage of the three-wheeled vehicles

is that one wheel is easier to steer than two wheels. The

single drive wheel, I think, is more of a disadvantage than an

advantage. For instance, if the rear drive wheel were in a

ditch and could not work its way out, the operator would be

stalled, but with two drive wheels one would not be in the

ditch, and would thus help to propel the vehicle.

As Mr. Bramwell says, a four-wheeler properly built has

its frame swiveled in the center of the front axle, and he

does not see any difference whether a wheel or a swivel is

employed at that point so far as stability is concerned.

Now this may all be true in going straight ahead, but if we

turn a sharp curve at a high speed the three-wheeler is

certainly more liable to upset than the four-wheeler, as the

extra wheel on the outside of the arc (which is formed when

the vehicle turns a curve) decreases the danger of upsetting,

and this is truer of a vehicle of a long wheel-base.

I believe a single steering wheel is superior for turning out

of ruts and car tracks, but on a country road the front wheel

does not track, but must run over all obstructions such as

snow, mud and stones that chance to be in the center of the

road. But with a four-wheeler when going straight ahead the

rear wheels follow the track of the steerers.

In my estimation a motor carriage should have four

wheels, the front wheels serving as steerers and all four wheels

as drivers. By this arrangement, if one pair of wheels are

ditched the other may not be. As. Mr. Bramwell says, custom

proves nothing to the designer of vehicles, but common sense

does.

Yours truly,

F. J. MILLER.

VOLUME X

of the HORSELESS AGE, bound with

or without advertisements, $3.

The Horseless Age,

Times Building, New York

Detroit Motor News

STEAM NAVIGATION COMPANY PREPARES TO EMBARK IN TRANSPORTATION THROUGH AIR—OWEN MERGER CONFIRMED—FORD TO INVADE NEW YORK

DETROIT, Oct. 24—Anticipating the time when arial navigation will to some extent supplant the means of travel now in vogue, the Detroit & Cleveland Aerial Navigation Co., of Detroit, has been incorporated, with a nominal capital stock of $50,000. The new organization, which by the way, so far as can be learned, is the first company to be chartered for carrying passengers through the air, is made up of stockholders in
the Detroit & Cleveland Navigation Co., and is much more farreaching than the name would indicate. The company operates side-wheel passenger fleets between Detroit, Cleveland, Buffalo and Mackinac and it is the intention as soon as aerial navigation has been rendered practical to supplement this service with a full line of airships for the accommodation of those desirous of traveling in that manner.

"We will not do any experimenting," says Vice-President and General Manager A. A. Schantz. "Our business is purely transporting passengers and freight. The minute airships become sufficiently practical we will add service of this nature. The capital stock mentioned in our articles of incorporation is merely nominal, and will be increased when the occasion requires. Personally I believe it will be a long time before any man succeeds in crossing the ocean in an airship of any sort. But with the rapid advancement in the development of aeroplanes there is no reason that I can see why tlights of two or three hundred miles should not be common within a few years, at the most. When that time arrives we want to be prepared for it."

Details have been completed for the taking over of the Owen Motor Car Company, of this city, by the Reo Company, of Lansing, as announced in The Horseless Age. Holders of Owen stock will receive stock in the Reo Company on an equitable basis, and some of the Owen officers will be given executive positions in Lansing. All the equipment and stock in the Detroit plant is being removed to Lansing, and the Reo will be managed on a more comprehensive scale than the rather limited manner in which affairs had been conducted since its organization.

The Ford Motor Company is to invade New York in a manufacturing way, announcement being made of the purchase of a tract of land at Jackson and Honeywell avenues, Long Island City, upon which a four-story concrete structure, 75 x 265 feet will be erected. This building will be equipped with every manufacturing facility, and will be at the disposal of dealers and subdealers in the vicinity of New York who handle Ford cars, and their customers. There will also be a fine display room and convention hall for branch managers of the Atlantic seaboard. It is the intention to have this factory ready for business by the middle of March.

Subscribers who are filling to act as

Local Subscription Agents 

for The Horseless Age, on a commission basis, are requested to communicate with the Editor

NEW DIAMOND DEMOUNTABLE

Carrying extra tires inflated and ready to run, a new demountable rim has been
developed by the Diamond Rubber Company, of Akron. O. The rim has just
been placed on the market and will have a conspicuous place in the Diamond
products for 1910. In design and construction it is both simple and strong
and permits the removal of the damaged tire with the application of a fresh one,
pumped up and ready for running, in scarcely more time than is required to
jack up the wheel.

A notable improvement over the Diamond 1909 demountable equipment is the
fact that the rim can be fitted to any automobile wheel felloe of regulation
construction without material alteration of the same. No machine work is necessary
on the wheel band or elsewhere and any competent blacksmith can, the
Diamond Rubber Company states, do the job properly and inexpensively. A
further improvement eliminates the necessity of mortising out the felloe to
admit the valve stem of the inner tube. A series of wedges fitting between the
wheel band and the rim itself take up all possible play and make the fit tight
and secure. For the same reason small irregularities, due to dinging of rim or
band or other causes, cannot interfere with the rim's quick and easy operation.

The new Diamond demountable will accommodate any standard make of
regular clincher tire. The Diamond Company has spent much time and energy
in developing and testing this new product and the vigor with which the
rim is being pushed is plainly indicative of the company's own confidence therein.

GASOLINE VS. STEAM.

The gasoline automobile is fast coming to the front, and with a few objectionable
features removed, will be a great boon to the traveling public. The present objections
to most machines of that order are the noise, the smell and the vibrations.
They are among the handiest, in other respects, for physicians, as they do not require
as much attention as do steam machines; but when they get out of
order, especially far from "home and mother," they are about as mysterious as
boarding house hash. It takes an expert to find out the difficulty, and even he is
often unequal to the task. They are often lugged home by the noble hay motor, with
the once haughty chauffeur perched on his lofty seat with one hand on the steering
handle and the other gently spread over his humiliated features.

When, after careful instruction and practical demonstration, I first began to run an
automobile alone I felt as timid and nervous as a young colt before a screeching locomotive,
but as time wore on and experience ripened, I found pleasure in my daily
rides, and now, after an extended experience, I feel safer in it than I would behind
a well fed horse.

The steam machine has some advantages above all others, as it runs more
smoothly, is noiseless and free from odor and vibration. It is also a great hill
climber. The power can be nicely graduated, and the sensation when riding is
more pleasant than in any vehicle yet made.

WOMAN WINS HOOSIER SOCIABILITY RUN

INDIANAPOLIS, IND., Oct. 4—When the summary had been figured out in
the first annual amateur sociability run last night, it was found the event had
been won by a woman. The winner was Miss Katrina Fertig, who came within 63
seconds of the secret schedule arranged for cars of class B, costing from $2,001 to
$3,000. Miss Fertig a year ago was one of the few drivers making a perfect score
in the reliability run to French Lick Springs and return. The run, which took
the place of the annual reliability run, was exclusively for private owners and
their drivers. There were no penalties and practically no rules, except that a professional
driver must have been in the employ of his employer for at least 30 days
before the run. None of the contestants knew the schedule upon which they were
supposed to run. There were four classes, and Robert B. Kramer, of Attica, arranged
a schedule for each class. This was kept  sealed until after all of the cars had returned
to this city, and there was much surprise, when it was found a woman had
won. Almost ideal weather and road conditions prevailed.

The run was to Mudlavia Springs and return, a pretty little resort in northern
Indiana, 5 miles from Attica. The outbound route was 83 miles long, going
through Crawfordsville, New Richmond. Newton and Attica. Returning, the route
was 104 miles, through Lafayette and Lebanon. There were four classes of entries,
as follows: Class A, cars selling $3,001 and over; class B, cars selling $2,001
to $3,000; class C, cars selling $1,001 to $2,000, and class D, cars selling at $1,000
and under. The running time for the different classes was: Class A, going
3:38:09, returning 4:54:21, total 8:32:30; class B, going 3:58:24, returning 5:19:09,
total, 9:17:33; class C, going 4:23:35, returning 5:38:42, total 10:02:17; class D,
going 4:50:03, returning 6:02:11, total 10:52:14. The results:

CLASS A—SCHEDULE, 8 :32 :30
Car and Entrant         Time
Packard 30, H. A. Archev 8 :25 :30
Packard IS, P. L. Wiltshire 8 :16 :30
Stoddard-Dayton. Carl G. Fisher.     Withdrawn
Locomobile, L. M. Wainwright 9 :14 :20
Stearns, J. T. Alfree        Withdrawn
Packard 18, W. A. Atkins 7 :31:03

CLASS B—SCHEDULE, 9 :17 :33
Premier, George A. Weidley 9 :56 :30
Premier, Miss Katrina Fertig 9 :16 :30
Knox, E. H. Wilson        Withdrawn
Premier, H. E. Stafford         9 :07 :00
Premier, L. W. Cooper        10 :12 :13
Premier, Bert A. Boyd 9 :59 :05
Premier, Miss Elizabeth Love 9 :43 :00
Premier, Mrs. Frank Schussler 9 :38 :30

CLASS C—SCHEDULE, 10 :02 :17
S-M-F, ,T. Rotbart         9 :01 :30
Overland, John A. George Withdrawn
E-M-F, H. H. Hauger Withdrawn
Oakland, Herbert Herff         Withdrawn
E-M-F, Joseph T. Elliott         8 :48 :32

CLASS D—SCHEDULE, 10 :52 :14
Maxwell, John Hayden 9 :32 :00
Hupmobile, F. I. Willis 10 :35 :30
Empire, Paul Smith         Official car

The prize was awarded to the driver of any class keeping closest to the schedule
in his class. The prize was a silver trophy donated by the Warner Instrument Co.,
which is to be contested for each year, unless one person can hold it 3 years in
succession, in which event he is to retain possession of the trophy. There were a
number of accidents, but fortunately none of them was serious. On Saturday the
Stoddard-Dayton confetti car No. 13, driven by Barrett Saltzgaber, ran into a
ditch between Crawfordsville and New Richmond and was wrecked. Mr.
Saltzgaber was only slightly injured and the Packard car, driven by H. A. Archer,
picked up the crew of the confetti car and carried it into Mudlavia.

Immediately after arriving at Mudlavia. dinner was served at the hotel at the resort.
This was followed by a hill-climb on the Devil's Elbow hill, which is about
1,030 feet long and ranges from a 9 to a 15 per cent grade. At the expense of Mr.
Kramer, of Attica, the hill was graded and the turns banked, and a timing device
was furnished by H. J. Sconce, of Sidell, Ill. Cars of each class participated in the
hill-climb. The winners of the various classes then entered a handicap climb, the
winner of this receiving a silver cup. The event was won by Carl G. Fisher, driving
a Stoddard-Dayton. The following is a summary of the hill climb:

CLASS A
Car and Driver                          Time
Stoddard-Dayton, Carl G. Fisher :20
Stearns, J. T. Alfree                 :22 1-2
Locomobile, L. M. Wainwright :27 1-4

CLASS B
Knox, E. H. Wilson                 :22 3-4
Premier, Miss K. Fertig                 :27 1-4
Premier, Mrs. F. Schussler         :35 1-4

CLASS C
Buick, Dr. P. H. Keys         :25 1-2
Oakland, Herbert Herff                 :25 3-4

CLASS D
Maxwell, John Hayden         :28 3-4
Hupmobile, F. I. Willis         :43 1-2

FINAL HANDICAP CLIMB
Car, Handicap, Driver         Time

Stoddard-Dayton, scratch, Fisher :19 3-5
Buick, :05 1-2, Keys         :28 3-5
Knox, :02 3-4, Wilson         :23 4-5
Maxwell, :08 3-4, Hayden         :30

Communications

Vol. 13, No. 10

Babbitt Bearings.
Editor HORSELESS AGE:
I note on page 665, issue of December 30, 1903, an article on "White Metal Bearings,"
by J. S. V. Bickford. He says it "hardly ever requires adjusting." My experience
is that it does need adjusting, but perhaps not so often as some other materials,
and constant adjusting where there is much duty. A bearing that could not
be adjusted would certainly be a failure on any well made machine. His assertion "All
you have to do is to wrap the bearing in asbestos twine, rubbed with lamp clay, and
warm it up until the metal runs, when you have a bearing as good as new," is certainly
a new one to me, and I would like to have Mr. Bickford explain the seemingly simple
operation more fully. When we have a babbitt bearing that is too bad to fill and
scrape to a fit we have to remove all babbit and repour.

Mr. Bickford says "this joint is used in Pratt & Whitney lathe head stocks, etc.,"
but my information is to the effect that it is poured, well hammered or rolled in the
boxes and then bored the same as any other bearing. I have never been able to pour
babbitt that would be tight in the boxes after it cooled, although the boxes were
heated before pouring, and I can vouch for the tightness of the babbitt in the Pratt &
Whitney head stock.
W. G. LUPER.

Gyrostatic Action.
Editor HORSELESS AGE :
I was interested in the editorial in your issue of March 2 on the gyrostatic action
of the flywheel as related to the strength of parts in an automobile, as I have been
working in that line for some time. I do not think that Mr. Ward has as yet presented
the matter in all its aspects. There is no doubt but that the flywheel very
strongly resists a force tending to change its plane of rotation under some circumstances,
but there is also another effect that I think must be taken into account.
When a force is exerted tending to change the plane of rotation, there is a strong
force created thereby at right angles to the first named force, and the parts should
be designed to resist this latter force. The parts may, I think, be so constructed that
there will be no gyrostatic resistance to the first named force, but they cannot be so
constructed that the latter shall not be exerted.

Professor Perry in his "Spinning Tops" (I think) observes that some locomotives
are not so fast as others of the same power, and he seems to attribute this to
such inertia effects, and Mr. Clough in a recent article remarks that the heavy
automobiles frequently take as little power to drive them at a certain speed as
do the light runabouts. It is quite possible that this may be due to the same or
related causes.

I have examined a number of works on mechanics with the hope of finding an
accessible treatment of the subject. The problem seems, however, to be
 treated from a theoretical standpoint, as investigating the very remarkable action of the
gyrostat in the familiar form of a toy, and is either too involved, mathematically, for
ready comprehension, or is not adapted to practical engineering conditions. For instance,
the mathematical expression for the time of nutation of the toy is curious, but
I do not at present see its practical application in automobile engineering.

I have worked out a formula which is sufficiently simple and rational in its derivation,
and have submitted it to some expert mathematicians, who have not as yet
found any error in it. I have designed an apparatus for experimental investigation of
the subject, and hope to have it constructed soon. I hope by this to prove my reasoning
either right or wrong.
E. J. STODDARD.

Roller Bearings for Qasoline Engines.
Editor HORSELESS AGE:
Can you tell me whether roller bearings are practical for crank shaft bearings of
two or four cycle gasoline motors or not? I am not sure whether the impulse of explosion
would tend to crack the rollers or not.
JOHN SIDINGHAM.

[Undoubtedly roller bearings could be made to withstand the shock of explosion
in an engine, but they are not used by any of the well known automobile and engine
builders, probably because they would need to be considerably larger in size than
plain bearings.—ED.]

Gas Engine Oils.
Editor HORSELESS AGE :
Kindly advise me in your next issue what a first class oil should consist of for a water
cooled motor. Should it be the product of a straight crude petroleum or should
it be of the material of a high grade cylinder oil, which I believe has more or less
fatty matter in it?

Kindly advise me who, in your opinion, makes the highest grade motor oil.
W. G. HORTON.

[Gas engine oil differs from the ordinary steam engine cylinder oil in that it is
wholly, or almost wholly, of mineral origin—a product of crude petroleum—whereas
the so called "cylinder oil" is largely composed of animal matter. The gas engine
oil is much thinner, has a higher fire test and does not soot the internal working
parts in the same degree as "cylinder oil" would. The gas engine oil is specially
adapted for cylinder lubrication, and should be used in the crank case if splash lubrication
alone is depended upon for oiling the cylinder. It may also be employed for all
of the bearings if it is considered an advantage to use only a single grade of oil.
Otherwise ordinary machine oil is very satisfactory for bearings. We cannot inform
you who makes the highest grade of cylinder oil.—ED.]

Explosion Engine Queries.
Editor HORSELESS AGE:
What should be the size of inlet and exhaust valves, also diameter and weight of
rim of flywheel, for a 5x6 inch cylinder gasoline engine, running from 700 to 750
revolutions per minute, compression 60 pounds gauge? Also, if possible, please
give formula for calculating the same.
FRANK B. GOULD.

[A clear diameter of 1¾ inches will be sufficient for both the inlet and the exhaust
valve. It is usual to make the clear diameter of the valves about one-third the diameter
of the cylinder. A proper size for the flywheel would be 22 inches in diameter,
with a rim section 2 inches deep by 2½ inches wide. Such a flywheel would
weigh a little over 100 pounds. A considerable range in the weight of the flywheel
is allowable, as a larger flywheel than that specified above would allow the engine to
run at a lower minimum speed under full load and would prevent it from being pulled
down in speed so much when short, heavy obstructions are encountered.—ED.]

Editor HORSELESS AGE :
The writer would like to have your opinion on a two cylinder opposed motor. We
now have a single cylinder engine 5x6 inches, which develops fully 7 horse power.
We should like to know, if we hitch two of these cylinders together on an opposed
type, what horse power we would obtain. Should it give 14, more or less?
N.

[A two cylinder engine should give approximately twice the power as a single
cylinder of the same cylinder dimensions. It might give even slightly more than
double the power, as the friction on the crank shaft and cam gear will most likely
not be twice as great as in the single cylinder machine, but, on the other hand, it
is somewhat difficult to perfectly attune the two cylinders so that each shall give its
maximum power at the same spark setting, which would probably counterbalance the
above advantage.—ED.]





-----------------------------------------------------------------------------------

The grievances of British motorists are to be tabulated by the Motor Union, says
the Daily Mail, and Parliamentary candidates will be asked for their opinions
thereon.

In an article by Claude Johnson in the Badminton Magazine on "The Magnificent
Mercedes, the Rich Man's Motor Car," the tire cost per mile is estimated at 19.5
cents, or $975 for 5,000 miles, and the rest of the annual expense on the basis of
15,000 miles running is given as $3,375. including $1,000 for the hire of a driver.

EXPLOSIVE MOTOR NUMBER

JANUARY 17TH

LEADING ARTICLES . . . .
The Hydrocarbon Engine as a Source of Energy, by ELWOOD HAYNES.
General Deductions, by HENRY W. STRUSS.
The Gasoline Engine Indicator Diagram, by E. C. OLIVER.
Vaporizers and Carbureters, by HERBERT L. TOWLE.
Ignition and Ignition Troubles, by P. M. HELDT.
Coils and Sparks, by E. J. STODDARD.
The Vibration of Explosive Motors, by HERBERT L. TOWLE.
Gasoline and Gasoline Mixtures, by E. J. STODDARD.
Multi-Cylinder Engines, by P. M. HELDT.
Gasoline Vaporizers and Carbureters, by HENRY W. STRUSS.
Balancing a Motor Carriage, by E. C. OLIVER.
Explosive Motor Data, by R. I. CLEGG.
An Explosive Motor in Detail, by R. I. CLEGG.

72 pp. PRICE, 1O CENTS, Stamps or Coin.

The Horseless Age,

150 NASSAU ST.. NEW YORK.

THE HOSSLESS RIG.

The evenin' chores wuz done an' I wuz settin' with my pipe,
A lookin' at the grapevines where the fruit wuz gettin' ripe,
An' a-listenin' to the hired han's discussin' uv the craps,
When who shud come a-ridin' up but tew swell city chaps
In one of them thar hossless things I'd heerd tell uv before,
But never 'lowed I'd live tew to see a-standin' by my door.

The feller who wuz runnin' it spuk up, jest reel perlite,
"Ef ye'll let us fill our biler here we'll pay ye what is right."
Says I, "I like to 'commodate, but water's gittin' skeerce
An' when the cistern's clean, plum dry the women folks is fierce,
But," says I, "I'll risk their jawin' fur a ride in that affair."
It costs ye fifty cents in York, they say, tew ride a square,
An' bein' as the water comes so free-like from the sky,
I 'lowed ef they shud take me up 'twould be a payin' high.

The feller laffed a leetle, an' says he, "It's gittin' late,
But water we hev got tew hev, so we'll accommodate";
An' while they fed an' iled her up I called the women tew,
Fur they'r ez anxious ez the men fur seein' things 'ats new.
It looked sum like a buggy, 'cept the shafts wuz out uv sight
An' thar wuz bars an' chains an' things 'at didn't seem jest right;
The handle uv it wuz turned back, an' I'll declar, by jocks!
The wheels wuz made of leetle rods an' rubber hard as rocks.

Tew things resemblin' toy clocks fust caught the women's eye,
An' a lookin' glass hung on the dash—I spose tew clean up by,
Fur no mistake about it, them tew chaps wuz mighty neat ,
An' kep' some water hangin' in a bottle by the seat.
But the outside warn't a sarcumstance, tho' interestin' enuff,
Tew the mystery uv the innards where they stored the engin' stuff;
But I didn't hev no time at all tew steddy out each part,
Fur the man 'at run the circus hed got ready now tew start.

An' when I clum intew the thing an' sot down by his side,
I bet I warn't a bit more skeered when I led out my bride;
But proud an' happy tew! my heart kep' swellin' in my chest
Till I felt sure I'd hev tew bust or open up my vest;
At fust the blamed thing started off so creepy like an' slow,
The hired man yelled out "Git ep" an' then he let 'er go!
We turned the corner by the gate so quick we near upsot,
An' past the medders an' the woods like cannon ball we shot.

I never spuk a single word—jest held on like grim death—
The wind wuz zippin' past us so it kind a-tuk my breath;
The neighbors all cum runnin' out as curious as cud be,
An' I bet ever' livin' soul wuz envyin' uv me.
We made the dust an' pebbles fly—an' barn yard critters tew—
An' hosses stood an' pawed the air when our rig hove in view;
But he'd tech somethin' with his foot an' stop 'er like a flash—
The fust time I warn't lookin' an' fell over on the dash.

But I enjoyed thet ride more—I'm sartin' thet I did—
Than any gorgeous street parade I'd went tew when a kid;
A ridin' after hosses now jest makes me fairly sick,
An' flyin's mighty pleasant, ef ye never stop tew quick.
But uv all the ways uv gittin' 'round thet ever I did see
That takes the cake! A hossless rig is good enuff fur me!

HOPE HATHAWAY.

NEW VEHICLES AND PARTS

NEW VEHICLES AND PARTS
Le Pontois' Electro-Magnetic Speed Changing Gear.

The speed changing gear with magnetic clutches, invented by Dr. Leon Le Pontois
and which was exhibited on a car at last year's Madison Square Garden Show, is
stated to have now been reduced to a thoroughly practical state, and will probably
soon be available in the market. The gear, of which a cross sectional view is shown
herewith, combines the planetary and lathe back gear principles, and all speed variations
are secured by magnetic friction clutches running in oil. The gear gives
three forward speeds and one reverse (direct drive on the high gear), and is very
compactly housed in an extension of the engine crank case. The engine flywheel
forms part of the gear, and it is stated that the gear for a double cylinder vertical 20
horse power engine weighs 300 pounds.

The flywheel A is mounted on the end of the shaft O, and constitutes a triple
magnetic field. It has annular grooves B, C and D cut in its surfaces, in which
are located coils enclosed in copper shells, hermetically sealed, protecting the winding
and its insulation from the action of the oil, and constituting at the same time a
damping circuit, shielding the coils from the field discharge. When these coils are
energized by an electric current a magnetic field is formed in the mass of the flywheel
which attracts and holds firmly the armature disks I, J or K. The current is sent
through these coils by means of wires leading to contact rings W, and by brushes X
to the source of electrical energy.

Annular fields E and G are held fast in the casing. A shaft M with bearings in the
shaft O and in the driven shaft N supports the armature disks and the gears. A disk
L keyed on the shaft M supports a shaft V carrying the pinions Q, S and U. A
gear P meshing with pinion Q is locked on the driven shaft N. A sleeve carries
the gear R and the armature disk J, gearR being in mesh with gear S. A second
sleeve carries the armature disk K and gear T, which meshes with gear V. The shaft
M also supports the armature disk I keyed on it.

When it is desired to run at a slow forward speed the disk L carrying the shaft V
is made stationary by being attracted and held fast by magnetic field G energized by
coil H. The pinion R is made to rotate with the shaft O by the armature J held
against the flywheel by coil C. The pinion R then drives the shaft V and shaft N
through the intermediary of gears S, Q and P at a low rate of speed.

To obtain the second speed, while disk L is held stationary, armature J is released
and current is sent through coils D. Disk K then turns solid with the flywheel, and
gear T drives shaft N through the intermediary of the gears V, Q and P.

Now let it be desired to engage the high speed. Clutch D is still magnetized. Disk
L is released from the grip of clutch G and disk I is attracted by clutch B. The whole
system of gears now rotates solid with the shaft, the whole mass forming a heavy flywheel.

To reverse, disk K is made fast to clutch E by coil F being energized; at the same
time disk I is made fast on the flywheel by coil B being energized. The disk L carrying
the secondary shaft V rotates with shaft O. The epicycloidal path described by gear
S being different from the path described by gear Q, the gear P rotates slowly in the
opposite direction to shaft M and thus the reverse motion is obtained.

Only six gears enter into play in these successive operations.

An oil pump driven by shaft N forces oil under pressure through the bearings of the
shaft M and bushings rotating on that shaft. This oil forms a thin film between the clutch
surfaces and the armature disks, which plays a very important part in the progressive
clutching and releasing of the disks when the field magnets are energized.

A simple generator, designed to deliver a constant current at whatever speed the engine
is driven, is used for operating the clutches up to 15 horse power. This generator
is of the ironclad type. A foot pedal, placed in series with the electric switch controlling
the fields, acts directly on an inductive rheostat, or choke coil, to enable the
operator to start the car with ease. The clutches are interlocking; that is, it is impossible
to engage two at the same time.

Tests are said to have shown that the energy required to magnetize the fields
amounts to somewhat less than half of 1 per cent, of the power transmitted. A
working model of the gear is shown at the office of the company owning the patents on
it, 200 Broadway, New York.

COMMUNICATIONS: Tire Life and the Speed Craze.

Tire Life and the Speed Craze.

Editor HORSELESS AGE:

In reply to W. Mason's letter in your paper of the 10th, I want to say that I

have a steam dos-a-dos which I ran a good many hundred miles with two grown

people and four children all over Western Massachusetts last summer, the second

year it has been run, and the repairs on the machine would not come to $10. Not

one breakdown occurred. What money was expended was mostly for extras or

improvements. I burned kerosene all summer, and once put in some oil out of

a dirty can without a strainer on it, and had to clean the burner, and in so doing

broke vaporizer while hot and had to get it fixed, at an expense of $3.

I will admit I spent a few dollars on a new kerosene burner which I was experimenting

with, but this was done for fun and had nothing to do with the carriage.

I paid 50 cents to get a 2 inch pipe cut in a repair station, and $2.40 to get my air

pump fitted in another place. Aside from a tire I got just before cold

weather set in for $5, my other one was good for another season, until in the dark

I ran onto a lot of sharp stone that the city had put in a hole in the road without

covering, and cut it so it was beyond repair.

My other tires (single tube pneumatic) have been run ever since early in the

spring of 1902, and not one puncture or one cent has been spent on them.

I had an early steam runabout before this which I ran any way over 4,000 miles

before a cent was spent on the tires (same make); then the two back tires required

new casing, although they never punctured. The fronts were running finely the

last I heard of the carriage.

But for the speed craze tires would last longer. No man can ride with pleasure

over any road at more than 15 miles an hour. I will never buy a car of a maker

who keeps a racer on the track, for I think such things are carried too far. If it

were not for the new law in our State it would be unsafe for a party wishing to

run an automobile for pleasure to go on the roads today, the way things are tending.

HARRY.

Should Amateurs Try to Improve Their Machines ?

Editor HORSELESS AGE:

Here is my experience:

Last year I got the auto fever. I decided to get a second hand one of a good

make to learn with. I bought a 1900 gasoline phaeton. I knew nothing about the

principle of a gasoline engine; inlet valves, exhaust valves, etc., were all a mystery

to me.

My experience in studying out all these things would require a book of 500 pages

to relate. I had lots of trouble, but when I studied out the matter always found the

fault was mine, excepting two improve ments that I added.

I found that when I had a heavy strain on the chain it would pull up tight as a

drum and I would then have to loosen up half a dozen bolts and hammer the frame

around that holds the rear sprocket. I noted the frame had a large bolt attached

to it, one end of which ran through the back frame with a nut on, thus preventing

the chain from becoming loose. I saw by putting a set nut on the other side

of this frame I could hold the chain just where it was set. Result, no more trouble

with it.

Improvement No. 2 was to fasten nuts to prevent them from becoming loose.

The frame being of wood, I quickly planned out this arrangement. I took a piece of

heavy strap iron, about ¾ inch wide and 1 inch long, drilled a screw hole through

one end, set it against the nut, sent the screw into the wood, and there it has

stayed. This is as simple as A B C and does the trick.

I do all this work myself. It does me lots of good to occasionally spend a

couple of hours after supper with overalls on working on the old machine, for it gives

me a change of work and exercise which I need.

I can make the machine run and have had many pleasant trips with it.

J. W. TOMPKINS.

The Right of Touring.

Editor HORSELESS AGE:

I write for information regarding the right of touring through the States of

Connecticut, Rhode Island, Massachusetts and New Jersey, and as far as Washington.

My auto is registered in New York State; do I require any other permit beyond

my driver's license and the registration?

WINSLOW TRACY WILLIAMS.

[A New York license will be honored in Massachusetts and Connecticut, but licenses

will have to be taken out in New Jersey and Pennsylvania. To get a Pennsylvania

license $2 must be paid for a certificate at the office of the prothonotary

of the county and then presented at the treasurer's office with $3 more, when a license

will be granted. Rhode Island requires no license.—ED.J

Winter Care and Use.

Editor HORSELESS AGE:

In experimenting with non-freezing compounds I found that chloride of calcium,

5 pounds to a gallon of water, eats holes in my tank. Polar ice machine oil

might do, but my pump will not circulate it, and it fries. Plain water, a slightly

warmed stable, an empty water line, and the engine left running or blanketed

with a piece of red flannel over the radiator keep me on the road every day.

A. H. R. GUILEY, M. D.

Who Makes Quadrants ?

Editor HORSELESS AGE:

Will you kindly let me know through the columns of your valuable paper where

I can purchase quadrants with small levers, such as are used for spark and throttle

control? C. SEFRIN.

[Manufacturers are now making their own quadrants. Supply dealers as a rule

do not keep them.—ED.]

THE OPPOSED CYLINDER ENGINE

It is quite evident from a census of the types of motors employed upon gasoline
cars at the Show that the double cylinder engine of the opposed type is extremely
popular. Its cost of construction has been reduced through improved methods of
manufacture to such a point that it is now offered as the motive power of runabout
cars at $750 or $850; it is still used upon several makes of full fledged touring cars
built by concerns of established and long standing reputation, and furthermore, constitutes
the power equipment of an intermediate class of vehicles called "light touring
cars" or "light tonneaus" which bids fair to become a very popular and useful type, selling
at a price between the runabouts and the high powered and most luxurious touring
vehicles, namely, at from $1,500 to $1,800.

It would seem that the opposed cylinder engine represents in the world of motors the
bourgoisie or middle class, ranking between the humble and proletarian single
cylinder engine and the high toned three or four cylinder motor of the de luxe vehicle.

Probably the double opposed type has been the most important element concerned in
the production of a reasonable low priced vehicle for the average buyer, which shall
be free from noticeable vibration and torque fluctuation. Hardly anyone will deny that
it is the steadiest running motor for the money and as such it is increasingly appreciated.

So great is its inherent superiority in steadiness of running over the twin type,
on account of the equal spacing of its power impulses and the fact that its vibration,
owing to its direction, is not exaggerated by the springs, that the popularity of the
twin type in front, as used in medium powered touring cars, appears to be somewhat
threatened, especially as the opposed motorwhen placed across the car can wear a bonnet
just as "becomingly" as the twin engine and thus answer the general demand for a
motor in front type of car. In fact, several manufacturers, in order to secure the symmetrical
power impulses of the opposed engine in the twin type, have made their
cranks with both throws on the same side of the shaft. This secures the desired end,
but as the reciprocating parts are all traveling in the same direction at the same time
the vibration from this source is as great as in a vertical single cylinder motor. The
heavy counterbalances required to minimize this defect probably weigh more than any
reduction of the flywheel weight which is made admissible on account of the greater
symmetry of the explosions.

The opposed cylinder engine is a characteristic American device, having been first
developed by one of our veteran automobile manufacturing concerns, which, by the way,
is still using it to the exclusion of all other types. It has been widely copied, and, on
account of its applicability to the engine in front type of construction, in all but high
powered cars, and the fact that when so used it is almost perfectly vibrationless, it is
likely to enjoy a brilliant future.

It has been remarked that the opposed motor is unknown in France, but it is hardly
to be believed that any one nation enjoys an absolute monopoly of engineering wisdom,
and it may be possible that there are some good things in the motor car business
which our clever friends across the water have in some manner missed.

Richmond lamps

No. 43. QUAKER.

AUTOMOBILE LAMPS.

ACETYLENE. OIL. ELECTRIC.

All kinds—for all uses.

Hand built—riveted.

Lamps made to satisfy the most exacting

automobile users.

We guarantee the Richmond Lamps throughout to possess greater

lighting power and finer wearing qualities than any other lamps.

RICHMOND IND MFG. CO.

RICHMOND, IND.

SHAFTING and BRASS and BRONZE BALLS

Standard Roller Bearing Co.

50th St. and Lancaster Ave., Philadelphia, Pa.

MANUFACTURERS OF

Ball Bearings, Roller Bearings,

Steel, Brass and Bronze

BALLS

Write for Catalogue with full particulars of the new

Standard Transmission Axle

in which the transmission is mounted on the rear axle

in the same housing as the differential.

Also manufacturers of SHAFTING HANGER BOXES with

Roller Bearings which can be purchased

from your local dealer.

Standard Roller Bearing Co., Philadelphia

RELIANCE-DETROIT: A Good Time to Think And Something to Think Of!

The present lull in business furnishes an opportunity—of which discriminating and farsighted manufacturers are promptly availing themselves.


Economy of operation must be considered, and we can help you to reduce expenses— at the same time increasing the efficiency of your plant. We are today building and selling

2 CYLINDER, 2 to 2½. ton trucks,

3 CYLINDER, 3 ton trucks,

4 CYLINDER, 4 ton trucks,

each capable of a 25 per cent. OVERLOAD. These three sizes constitute the only capacities for economical trucking.

Send at once for Catalog and Prices.

RELIANCE MOTOR CAR COMPANY,

DETROIT MICHIGAN

Reliable Agents Wanted

Special Notices

Advertisements

Inserted

Under This Heading

at $0.50 an

Inch for Each Issue,

Payable

in Advance.

Half Inch, 75 Ct.

MOBILE, run about 1,600 miles, excellent
steamer, perfect condition, trial given. Price,
$350. Dr. B. A. O'Bryon, Ridgefleld, Conn.

WHITE Steam Carriage, in A 1 condition, except
finish on body, which shows wear.
Price, $875. Address M. T. C, care Horseless Age.

CLEVELAND Tricycle, $100, cost $350. Orient
tricycle. 3-1/4 h. p. motor, water cooled head. 2-1.2-
inch G. & J. tires, $200, cost $450; fine condition.
Harry R. Geer, 1017, Pine St., St. Louis, Mo.

VICTOR Steam Automobile with victoria top.
Used but little In perfect order, and good
in every way as new. William Mossman, Mattapan,
Mass.

WINTON, 1900 model, in good condition. New
Apple igniter, full leather top; 8-1.2 h. p.
Price, $800. M. Bonner Flinn, 15 King St., Worcester,
Mass.

OLDSMOBILE. new this season, used by agent
for demonstrating, condition perfect. No
better value offered anywhere. Address A. B. C,
care this office.

WINTON Surrey and Single Seat for sale, $1,000
and $750; late improvements, first class order
for instant use, many extras. Robin Damon,
Salem, Mass.

A $35 grade Acetylene Automobile Headlight in
good order. Box 227, Springfield, Mass.

IMPORTANT—I will now sell my patent Reversing
Valve for auto steam engines at a
sacrifice, or would exchange for an auto. D. W.
Roy, Box 431. Tucson, Ariz.

FOR SALE.
Mons. Serpollet's World's Record Breaking

Car, which holds the world's kilometre
record of 29-4/5 seconds, equal to 75 miles per
hour. Price. ₤2,000, or nearest offer. Apply
to W. L. CREYKE,
16 George St., Oxford, England.

FOR SALE.
1901 Winton. Just had $118.40 worth of improvements,
including 1902 spark advancer
and oiler, new wiring, sprockets, etc. In
good running order. Price, cash, $850—if
taken immediately.
R. J. SALTSMAN, 2d, Erie, Pa.

FOR SALE.
1900 Winton in perfect order. New differential,
new change speed gears, spark advancer, Dietz
lamps, Edison battery, two 4x36-inch extra tires.
$650. U. S, " Long Distance" with top, mud
guards, Dietz lamps, odometer, extra tire and
Edison battery. Has been run but little, and is
better than new. $850,
DR. DANIEL LONGAKER,
645 N. Eighth St., Philadelphia, Pa.

FOR SALE.
A 12 h. p. practically new Gasmobile
Surrey. Special finish, in perfect running
order; can be seen by appointment. Price,
$2,200. Reason for selling, owner has purchased
larger machine.
Address C. D., care Horseless Age.

FOR SALE.
Haynes-Apperson single seated automobile;
1902 model, detachable, reversible
front seat ; will accommodate two extra
people; in first-class order; has run perhaps
five or six hundred miles; can be seen and
tried at the residence of the owner. Price,
one thousand dollars ($1,000). Address
ALFRED I. DuPONT,
Wilmington, Del.

FOR SALE,
Winton Surrey, 1901 model, with
new spark advancer, new tires and
two extra tires, $1,000.

H. C. TODD,
1416 So. Perm. Square, Philadelphia.

FOR SALE.
Six Mobile Wagonettes, seating capacity
ten passengers each; not one of these machines
has been run over 150 miles ; all are
in as good condition as when they left the
factory. Price, |1,600, cash, f. o. b. cars
San Jose, Cal.
ROBERT C. KIRKWOOD,
Mountain View, Cal.

FOR SALE
or exchange for light gasoline or electric
runabout, one Columbia Mark
XII. Runabout, new last November,
three new tires, valued at $350 ; also
one 22-foot cabin gasoline launch,
double cylinder motor, not run 50
miles. Value, $600. Will sell or
exchange either or both.
AUTO-MARINE ELECTRICAL CO.,
Waikins, It. Y.

FOR SALE.
Geuuine De Dion Quadricycle, 2-1/4 h. p.
Longuemare carburetor, Chenard front seat,
new tires and extra tubes, extra valves,
rubber apron, gas lamps, horn, tricycle
wheel, in fine condition, except paint.
Have larger machine. Price, $250.
E. T BIRDSALL,
170 Woodland Ave., New Rochelle, N. Y.

A WHITE STEAMER.
I offer for sale the above carriage, guaranteed
to be strictly first class in every respect. Complete
with top, side curtains, boot, lamps and outfit
of tools. Manufacturers' price, $1,200. My
price, $900 cash.
FLOYD A. GOODWIN,
Bay City, Michigan.

FOR SALE—My 1901 De Dion 5 H. P. Motorette,
built on special order and used latter part of
summer just mough to get everything into perfect
working order. This carriage will seat four; has
fine leather top; large rubber storm boot; specially
large gasoline tank; oil tank and pump.
Speed controlled by pedal or lever, as desired.
Numerous improvements of details; also efficient
sprag. Tires, 30 in. by 3-1.2 in. Goodrich "Clinchers"
now good as new and very satisfactory (am placing
same type on my new carriage). This machine
was cared for by one of the best machinists in extensive
engine building works, and is far better
than a new carriage would be. It is specially designed
for moderate speed country touring, and
has proven its reliability. No parts are worn
more than to secure good surface. Has just been
repainted. Cost nearly $1,700. Will deliver immediately
on board cars and pay freight to any
point in United States, but will not take less than
$1,200 cash. Photograph sent on application. E. E.
KELLER, Vice-President The Westinghouse Machine
Company, Pittsburg, Pa.

FOIL SALE
1901 12-Horse Power Winton semi-racer, with
leather phaeton top, which has never been used ;
has spark advancer, throttle governor, Holtzer-
Cabot magneto sparker with automatic switch to
batteries; wheel steering, and is capable of 40
miles an hour over good roads; has just been
thoroughly overhauled and is in first-class condition
for this season's work. Price $1,500.
Address GEORGE F. FOOTE,
Cornell University, Ithaca, N. Y.

VOLUME VIII.
of the Horseless Age, bound with
without advertisements, $5.
The Horseless Age,
Times Building, New York.

-------------------------------

WE CAN SELL YOUR AUTO,

whether a $15,000 Panhard or a motor cycle made with
your own hands. We have customers for any and all kinds.
Oldest established general Automobile Agency In the United States.
DU BOIS' AUTOMOBILE AGENCY, 220 Broadway, New York.

The Clark Detachable Tire.

The Clark Tire Company, of Chicago,

111., have recently placed upon the market

a new detachable tire, differing considerably

from the usual tire of this description.

It is composed of a strut band, a casing

and an inner tubing.

The strut band is composed of a strip of

metal to which are attached a number of

struts so spaced and arranged that when

placed on the rim five of the struts engage

the openings in a standard rim.

The casing is made of the Para rubber

and constricting fabric; it is molded in

oval form to give it a compressed tread.

Upon each side of the casing is a chafing

roll so placed as to lie directly upon the

rim edges, thus preventing the rim from

coming in contact with the casing proper.

Eyelets are placed in the casing under the

chafing rolls and so spaced as to engage

the struts on the band.

The tube is said to be of extra heavy

construction.

The compressed tread is an advantage,

as by its means cuts or punctures have a

tendency to close immediately. The manufacturers,

however, do not claim a puncture

proof tire.

Repairs can be effected on the road, and

without the use of tools any part of the

casing can be released and the inner tube

withdrawn at the place punctured, a patch

applied and a permanent repair effected,

without the loss of much time.

Minor Mention

During his recent visit to London the
Shah of Persia bought six automobiles,
each of 12 horse power, roofed and convertible
into a close carriage. Each car
has seating accommodations for eight
persons. Two of the vehicles are to be
sent to Persia immediately with engineers
who have been engaged for them.

Removal

To secure more room we have moved our office from the
sixth to the thirteenth floor of the American Tract Society
Building, where our advertisers and subscribers are invited to
call.

Alcohol Motors

In the Acetylene Number, to be issued in May, we shall

also consider the availability of alcohol as a fuel for vehicle

motors. It is well known that alcohol is a poor fuel as compared

with gasoline or kerosene, and that its economical use

in motors would only be possible if the price of gasoline were

raised to the point of extortion or its supply should fail and

the tax on alcohol now levied by the Government were abolished.

Still, we shall endeavor to present some interesting

facts in regard to this fuel.

Honor to Whom Honor is Due

More honor to the Honorable J. Scott Montagu, M. P.!

He told the truth. The motor trade of Great Britain had

waited and suffered long, but now that the silence is broken

and Lawsonian tactics are held up to public scorn, the tide

has turned and more rapid and substantial progress may

be expected.

----------------------|----------------------

The promoters of the Lead Cab flotilla are squeezing some

of the water out of their stocks. If they will only sit a little

longer on the stool of repentance perhaps they will muster

up courage enough to tell their shareholders and the public

what it costs to operate Lead Cabs. No doubt a further reduction

of capital stock would then be found advisable.

Do You C Stars When You Think of Wrenches?

Everybody does. That is what comes of 70 years of successful manufacture.

























The star trade mark is stamped on every COES.

COES WRENCH COMPANY

WORCESTER, MASS.
New York Agents:
J. C. McCARTY & CO., 21 Murray Street.
JOHN H. GRAHAM & CO., 113 Chambers Street

Newly Elected Officers of the AUTOMOBILE CLUB OF AMERICA

If you should encounter any of this august body upon the street, be sure to compliment them upon the sterling work they do. Except for Mr. Ripley, whose sanguine tendencies have been well-documented elsewhere.

ALBERT C. BOSTWICK

J. DUNBAR WRIGHT

A. R. SHATTUCK

MALCOLM W. FORD

SYDNEY DILLON RIPLEY

JEFFERSON SELIGMAN

J. M. CEBALLOS

DAVE H. MORRIS

Temporary Inconvenience and Dangers

Among the recent legal decisions affecting

the rights of automobilists on the public

highways, is the clear and strong opinion

by Judge Sutherland of the Rochester

municipal court, of New York. The conclusions

of the judge, as stated in that

opinion, are undoubtedly good law, and

the breadth of view displayed in that

opinion has been a material aid to the

whole industry. The concluding remarks

In the opinion referred to are as follows:

"The temporary inconvenience and dangers

incident to the introduction of these

modern and practical modes of travel

upon the highway must be subordinate

to the larger and permanent benefits to

the general public resulting from the

adoption of the improvements which science

and inventive skill have perfected."

Ignition: Troublesome

It is generally admitted that the ignition is at present the

most bothersome part of a gasoline motor for the novice to

handle, and some manufacturers advocate a single cylinder

motor for this reason alone. Although admitting that for general

purposes of construction the two-cylinder motor is to be

preferred, they believe it is easier to study the electric ignition

with one cylinder than with two.

The Coast is Clear

With the exception of New York State, the coast is apparently

clear for the motor vehicle throughout the United

States. License laws and speed laws are being discussed and

will in some instances be enacted, but from the present outlook

the motor vehicle will not be burdened with adverse

legislation to any great extent, nor for any great length of

time. Speed laws are reasonable and necessary; license laws

are not with the probable exception of some classes of steam

vehicles which may have to be subjected to some kind of

supervision by the authorities.

In point of legal status, therefore, motor vehicle manufacturers

have little cause for complaint and it will be their

own fault if the coast does not remain clear for them.

Dead Letter Laws

As predicted by the editor of The Horseless Age, the park

authorities who have been so injudicious as to exclude motor

vehicles from their confines are offering but a feeble resistance

to violators of their ordinances. Having stirred up a

perfect hornets' nest of criticism from all sides, they are quite

content to save their official dignity by letting the matter

drop as quickly as it will. They had not counted on the popularity

of the motor vehicle, and to public; opinion, must all

publjc servants bow

The Roaring Lion.

The lion's roar of the monopolists who early in the year

were seeking whole motor industries to devour has dwindled

to a bird-like chirp, just loud enough to remind us of their

existence and altogether peaceful and domestic in its tone.

We are glad to have the monopolists with us. The motor

vehicle industry is big enough to accommodate any number of

monopolists, as well as independents of all kinds and degrees,

and when the lion has lost his roar and his claws he is forced

to content himself with a more abstemious diet.

Horse and Driver Alike

Elwood Haynes, of the Haynes-Apperson Co., Kokomo,

Ind., who recently made the long run from Kokomo to New

York in one of their carriages, says he believes the average

horse is afraid of a motor carriage, not because of the noise it

makes, but because it moves along without the aid of animal

power, and, therefore, has about it something uncanny to the

equine mind. Other users who have carefully observed the

conduct of horses in meeting motor vehicles on the road are

of the same opinion, and as a like bewilderment and terror may

be observed in many of the human beings who drive horses,

the mental processes of the horse and the man appear to be

quite similar after all

SPECIAL NOTICES.

Advertisements Inserted under this heading at $2.00 an Inch for each

issue, payable in advance.

WANTED.

Special contributors to THE HORSELESS AGE on
all important subjects relating to Motor Vehicles.
Fair compensation. Address THE HORSELESS AGE,
150 Nassau Street, New York.

FOR SALE.

A "Locomobile," direct from the factory, with
makers' latest improvements, and tools, bell, etc.,
besides. Price, $800 00. Can be seen in New York.
Immediate delivery. Address K. B.,
Care HORSELESS AGE.

PARTS.

Front axle complete for four foot track with complete steering
device with rods and handle. Reaches all ironed with brass
boxes attached for either roller or plain bearings. Rear axle
with or without differential, braces, collars, etc. Gearing, etc.
Write for prices and drawings.
A. L. DYKE, Hope, Ark.

We are delivering motor vehicles regularly. Four
styles. Catalog free. Motors and supplies on hand.
Also two second-hand machines at attractive prices.
DURYEA MFG. CO.,
Peoria, 111

LOCOMOBILE WANTED.

$700.00 offered for new Stanley Locomobile, delivery
before October 15th. LOUIS WILCOX, Grand
Avenue, Corner Atwater Street, New Haven, Conn